nafiriguitar
Cort Elrick NJS 5 in White
Cort Elrick NJS 5 in White
픽업 사용 가능 여부를 로드할 수 없습니다.
Features
Alder Body
The Alder body provides a perfectly balanced tone while giving a slight boost on high mid range. It's one of the most ideal tonewoods for solid body basses of major bass makers since the 1950's.
Voiced Tone VTB-ST Pickups
The new Voiced Tone VTB-ST single-coil pickups perfectly complement the big robust sound of the bass with modern clarity, transparency and vintage warmth while eliminating noise with its hum canceling design.
Special Bartolini® Preamp
The same specially designed Bartolini® preamp that are installed on the US made original Elrick NJS basses are equipped, featuring 3-band EQ, 2-way push/pull mid select, and push / pull active bypass for a variety of tone combinations and manipulations.
MetalCraft M Bridge
The solid, high-mass MetalCraft M bridge was developed with more focus on ease-of-use and greater tone transfer. Specially adjusted for Elrick NJS, the bridge offers string loading from the back of the bridge for easier operation as well as greater tuning stability and focused sound. Another big improvement for the tone transfer is the deep individual slots that hold the saddles rock-tight, preventing any unwanted movement and allows string vibrations to correctly transfer to the body. MetalCraft M4 and M5 now come with string spacing of 19㎜(0.750”) for the 4-string M4, and 18㎜(0.708”) for the 5-string M5.
“Heel-less” Body Design with Extended Treble Access
A unique feature to Elrick NJS, the neck joint is greatly reduced to facilitate easy access to the upper register of the fingerboard. And to optimize stability as well as playability, the neck attaches via six bolts in an asymmetrical pattern.
Hard Maple Neck and Fingerboard
The hard maple provides power and stability as well as contributing a warm, beefy and punchy tone with a strong upper midrange. Dense and rigid yet with just the right amount of tactile flexibility, it responds sensitively to your picking attack and slapping techniques with plenty of articulation and power.
Hipshot® Ultralite Tuners
The Elrick basses are equipped with Hipshot® Ultralite Tuners (classic 20:1 tuning ratio) that is made of cast zinc with aluminum strings posts and mounting nuts, resulting in 30% weight reduction over other regular tuners and which results in improved balance and tuning accuracy.
Zero Fret
The zero fret does the job of the bass nut by setting the string height over the fretboard when being played open. The nut is still used as a guide to set the string spacing before going to the tuners. Since the nut is not responsible for the open notes, players can change to any string gauge without worrying about resizing or replacing the nut, and be free from any unwanted friction between the nut and the strings
Angled Headstock
The leaned-back angled headstock provides better string tension for longer sustain and even resonance without the use of string trees
| CONSTRUCTION | Bolt-On |
|---|---|
| BODY | Alder |
| NUT WIDTH | 1 7/8" (48㎜) |
| NECK | Hard Maple 3pcs |
| FRETBOARD | Hard Maple Radius: 12" (305㎜) |
| FRETS | 24 w/ Zero Fret |
| SCALE | 35" (890㎜) |
| INLAY | White Pearloid Block |
| TUNERS | Hipshot® Ultralite |
| BRIDGE | MetalCraft M5 |
| PICKUPS | Voiced Tone VTB-ST |
| ELECTRONICS | Bartolini® Elrick NJS Special Preamp |
| HARDWARE | Chrome |
| STRINGS | D'Addario® EXL170-5SL |
| SPECIAL | Bone Nut |
